dmesg - 4.7GHz 2133RAM
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-35-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #62-Ubuntu SMP Fri Aug 15 01:58:42 UTC 2014 (Ubuntu 3.13.0-35.62-generic 3.13.11.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bd9a9fff] usable
BIOS-e820: [mem 0x00000000bd9aa000-0x00000000bdb2ffff] reserved
BIOS-e820: [mem 0x00000000bdb30000-0x00000000bde7cfff] ACPI NVS
BIOS-e820: [mem 0x00000000bde7d000-0x00000000bea3efff] reserved
BIOS-e820: [mem 0x00000000bea3f000-0x00000000bea3ffff] usable
BIOS-e820: [mem 0x00000000bea40000-0x00000000bec45fff] ACPI NVS
BIOS-e820: [mem 0x00000000bec46000-0x00000000bf06dfff] usable
BIOS-e820: [mem 0x00000000bf06e000-0x00000000bf7eefff] reserved
BIOS-e820: [mem 0x00000000bf7ef000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000043fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: MSI MS-7693/970A-G46 (MS-7693), BIOS V2.6 10/08/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BF800000 mask FFFFFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000440000000 aka 17408M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
total RAM covered: 3064M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3064MB, range: 8MB, type UC
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8b0-0x000fd8bf] mapped at [ffff8800000fd8b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
[mem 0x43fe00000-0x43fffffff] page 1G
init_memory_mapping: [mem 0x43c000000-0x43fdfffff]
[mem 0x43c000000-0x43fdfffff] page 1G
init_memory_mapping: [mem 0x400000000-0x43bffffff]
[mem 0x400000000-0x43bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0xbd9a9fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbd7fffff] page 2M
[mem 0xbd800000-0xbd9a9fff] page 4k
init_memory_mapping: [mem 0xbea3f000-0xbea3ffff]
[mem 0xbea3f000-0xbea3ffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xbec46000-0xbf06dfff]
[mem 0xbec46000-0xbedfffff] page 4k
[mem 0xbee00000-0xbeffffff] page 2M
[mem 0xbf000000-0xbf06dfff] page 4k
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0xbf7ef000-0xbf7fffff]
[mem 0xbf7ef000-0xbf7fffff] page 4k
init_memory_mapping: [mem 0x100001000-0x3ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35b62000-0x36da8fff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000bde6e068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bde74520 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
ACPI: DSDT 00000000bde6e158 0063C2 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bde76080 000040
ACPI: APIC 00000000bde74630 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000bde746d0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000bde74718 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000bde74758 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: IVRS 00000000bde74790 0000D0 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
Initmem setup node 0 [mem 0x00000000-0x43fffffff]
NODE_DATA [mem 0x43fff6000-0x43fffafff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x43fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xbd9a9fff]
node 0: [mem 0xbea3f000-0xbea3ffff]
node 0: [mem 0xbec46000-0xbf06dfff]
node 0: [mem 0xbf7ef000-0xbf7fffff]
node 0: [mem 0x100001000-0x43fffffff]
On node 0 totalpages: 4185473
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12088 pages used for memmap
DMA32 zone: 773604 pages, LIFO batch:31
Normal zone: 53248 pages used for memmap
Normal zone: 3407871 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbd9aa000-0xbdb2ffff]
PM: Registered nosave memory: [mem 0xbdb30000-0xbde7cfff]
PM: Registered nosave memory: [mem 0xbde7d000-0xbea3efff]
PM: Registered nosave memory: [mem 0xbea40000-0xbec45fff]
PM: Registered nosave memory: [mem 0xbf06e000-0xbf7eefff]
PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbf800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88043fc00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4120052
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ b4000000
PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
Memory: 16311860K/16741892K available (7372K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 430032K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:1288 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4700.526 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 9401.05 BogoMIPS (lpj=18802104)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00bf800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28537 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (75208.41 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbdb30000-0xbde7cfff] (3461120 bytes)
PM: Registering ACPI NVS region [mem 0xbea40000-0xbec45fff] (2121728 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:20:43, date: 09/13/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe40b000-0xfe40b3ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe40a000-0xfe40afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe409000-0xfe4090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe408000-0xfe408fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe407000-0xfe4070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe400000-0xfe403fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe406000-0xfe406fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe405000-0xfe405fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe404000-0xfe4040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:1380] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xfe200000-0xfe21ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xfe220000-0xfe22ffff pref]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xfe104000-0xfe104fff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xfe100000-0xfe103fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.0: bridge window [mem 0xfe100000-0xfe1fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd9aa000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbea40000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf06e000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0480-0x0481] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfeb20000-0xfeb23fff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:04: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfe100000-0xfe1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18716K (ffff880035b62000 - ffff880036da9000)
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Interrupt remapping enabled
pci 0000:00:00.2: irq 72 for MSI/MSI-X
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb99aa000-0xbd9aa000] (64MB) mapped at [ffff8800b99aa000-ffff8800bd9a9fff]
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x06000822
microcode: CPU1: patch_level=0x06000822
microcode: CPU2: patch_level=0x06000822
microcode: CPU3: patch_level=0x06000822
microcode: CPU4: patch_level=0x06000822
microcode: CPU5: patch_level=0x06000822
microcode: CPU6: patch_level=0x06000822
microcode: CPU7: patch_level=0x06000822
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1410632442.900:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31895
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90011c00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe407000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe404000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe40a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe408000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe406000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 18, io mem 0xfe405000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 75 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:02:00.0: irq 80 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
usb usb8: SerialNumber: 0000:02:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
usb usb9: SerialNumber: 0000:02:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 14:176:342
rtc_cmos 00:05: setting system clock to 2014-09-13 18:20:44 UTC (1410632444)
powernow-k8: This CPU is not supported anymore, using acpi-cpufreq instead.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[148]: starting version 204
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0: irq 81 for MSI/MSI-X
scsi2 : ahci
r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018f8000, 44:8a:5b:89:1a:ff, XID 0c900800 IRQ 81
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
ata1.00: ATA-7: WDC WD5000AAKS-22TMA0, 12.01C01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-7: ST3808110AS, 3.ADH, max UDMA/133
ata1.01: 156250000 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.01: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 12.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 0:0:1:0: Direct-Access ATA ST3808110AS 3.AD PQ: 0 ANSI: 5
sd 0:0:1:0: [sdb] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6: SATA link down (SStatus 0 SControl 300)
sda: sda1
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
sdb: sdb1 sdb2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
tsc: Refined TSC clocksource calibration: 4700.175 MHz
random: init urandom read with 85 bits of entropy available
init: plymouth-upstart-bridge main process (229) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (238) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (242) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 9-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 9-1: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 9-1: New USB device found, idVendor=0bc2, idProduct=ab21
usb 9-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 9-1: Product: BUP Slim BK
usb 9-1: Manufacturer: Seagate
usb 9-1: SerialNumber: NA771DS5
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[349]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
cfg80211: Calling CRDA to update world regulatory domain
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc900018bcb00). heartbeat=60 sec (nowayout=0)
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
SKU: Nid=0x1d sku_cfg=0x4007f603
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x000000f6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x1
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x1e
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d
realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0892
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
type=1400 audit(1410632445.574:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=459 comm="apparmor_parser"
type=1400 audit(1410632445.574:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=459 comm="apparmor_parser"
type=1400 audit(1410632445.574:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser"
type=1400 audit(1410632445.574:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=459 comm="apparmor_parser"
type=1400 audit(1410632445.574:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser"
type=1400 audit(1410632445.574:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=459 comm="apparmor_parser"
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
hda_intel: Disabling MSI
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Disabling 64bit DMA
hda-intel 0000:01:00.1: Enable delay in RIRB handling
usb 4-3: new full-speed USB device number 2 using ohci-pci
random: nonblocking pool is initialized
ath: EEPROM regdomain: 0x21
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: AU
ath: Regpair used: 0x21
usb-storage 9-1:1.0: USB Mass Storage device detected
scsi6 : usb-storage 9-1:1.0
usbcore: registered new interface driver usb-storage
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90011bc0000, irq=46
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: AU
cfg80211: Regulatory domain changed to country: AU
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
init: failsafe main process (625) killed by TERM signal
type=1400 audit(1410632445.770:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=771 comm="apparmor_parser"
type=1400 audit(1410632445.770:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=771 comm="apparmor_parser"
type=1400 audit(1410632445.770:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=771 comm="apparmor_parser"
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 4-3: New USB device found, idVendor=046d, idProduct=c52b
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: USB Receiver
usb 4-3: Manufacturer: Logitech
init: cups main process (780) killed by HUP signal
init: cups main process ended, respawning
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:05:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 4-4: new full-speed USB device number 3 using ohci-pci
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 343.13 Thu Jul 31 19:06:44 PDT 2014
Switched to clocksource tsc
init: plymouth-upstart-bridge main process ended, respawning
usb 4-4: New USB device found, idVendor=045e, idProduct=028e
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-4: Product: Controller
usb 4-4: Manufacturer: Microsoft Corporation.
usb 4-4: SerialNumber: 06908C83
hidraw: raw HID events driver (C) Jiri Kosina
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input16
usbcore: registered new interface driver xpad
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-3/input2
input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.2/0003:046D:C52B.0003/input/input17
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:12.0-3:1
nvidia 0000:01:00.0: irq 82 for MSI/MSI-X
scsi 6:0:0:0: Direct-Access Seagate BUP Slim BK 0143 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdd] 3907029167 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 2b 00 10 08
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
sdd: sdd1
sd 6:0:0:0: [sdd] Attached SCSI disk
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
init: udev-fallback-graphics main process (1159) terminated with status 1
init: plymouth-splash main process (1177) terminated with status 1
wlan0: authenticate with bc:ee:7b:97:7e:84
wlan0: send auth to bc:ee:7b:97:7e:84 (try 1/3)
wlan0: authenticated
wlan0: associate with bc:ee:7b:97:7e:84 (try 1/3)
wlan0: RX AssocResp from bc:ee:7b:97:7e:84 (capab=0x411 status=0 aid=5)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
audit_printk_skb: 153 callbacks suppressed
type=1400 audit(1410632475.208:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2220 comm="apparmor_parser"
type=1400 audit(1410632475.208:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2220 comm="apparmor_parser"
type=1400 audit(1410632475.208:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2220 comm="apparmor_parser"
systemd-hostnamed[2910]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
hub 4-0:1.0: port 4 disabled by hub (EMI?), re-enabling...
usb 4-4: USB disconnect, device number 3
usb 4-4: new full-speed USB device number 4 using ohci-pci
usb 4-4: New USB device found, idVendor=045e, idProduct=028e
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-4: Product: Controller
usb 4-4: Manufacturer: Microsoft Corporation.
usb 4-4: SerialNumber: 06908C83
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input18
wlan0: AP bc:ee:7b:97:7e:84 changed bandwidth, new config is 2437 MHz, width 2 (2447/0 MHz)